2.4G DMX 512 Wireless Receiver Transmitter Controller For Laser LED PAR Lamp Disco Bar Party DJ Stage Show Lights Effect Control
USD $40.002.4G DMX 512 Wireless Receiver Transmitter Controller For Laser LED PAR Lamp Disco Bar Party DJ Stage Show Lights Effect Control
Selected:
ChinaTransmitterEU plug
*quantity
-
+
DESCRIPTION
REVIEW
Features:
1. DMX512 Wireless Receiver/Transmitter transmits standard DMX 512 protocol data (generated by console) by wireless way. No time defay when signal data is transmitting signal data is real time and reliably.
2. This product adopts a 2. 4G ISM frequency section. High effective GFSK modulate,communication design; jumping frequency automatically, high anti-jamming ability.
SPecification:
1. 2. 4G Wireless DMX512 Receiver/Transmitter
2. 126 Channels jumping frequency automatically, high anti-jamming ability. To ensure works reliability
3. 7 groups ID code settable, User can use 7 groups individual wireless net without any interfere.
4. Each other in the same place... (Tricolor LED displaying Indicators)
5. Input Voltage: DC 5V@500mA MIN
6. Cornmunication Distance 400M (visible distance)
7. Work Frequency Section : 2. 4G ISM, 126 Channels. frequency section
8. Max transmitting Power rate 2od Bm
9. Receive Sensitivity : -106dBm
10. DMX Signal Interface : 3PIN/5PIN male plug/female plug
Package include :
1 x Transmitter / Receiver
1 x Power Adapter
1 x Power Adapter
Operating Manual:
ID code and LED color corresponding relationship
l: RED 2: GREEN 3: RED+GREEN 4: BLUE 5: RED+BLUE 6: GREEN+BLUE 7: RED+GREEN+BLUE
1. Press momentary switch above the side led indicator to indicata IDsetting.
2. Press again ID key, to the color ID desired, adding 1 each time you press the switch will advance the color ID code.
3. Working condition :
LED constant lit up : No DMX or wireless signal.
Red LED flash : Transmitting.
Green LED flash : receiving
4. RF frequency 2.4G ISM, it's searching automatically.
5. ID Code "1-7" groups ID code, Press'KEY'for setting, it only can work under same ID code of transmitter and receiver. (Same LED Color).
Establishing Communication:
1. Power on DMX512 wireless received board first and then following to power up the transmitted boards.
2. Press "key" button to set same ID avalue of transmitted board and received board. Please use diffefent ID value if you need use more than 1 group wireless universais at same time in same place.
3. The red LED flashes when transmitter transmits DMX data by no interfered frequency section, then receiver changes communicated frequency section. Green LED flash till received corrected same ID value,
LED flash more fast once DMX data more fast.
4. Communication was established correctly. Please note some DMX fixtures need to be placed into slave mode for proper DMX control. If in the masteR mode they will send a DMX signal out the xlr jacks causing
the auto scan transmitter/receivers to go into a transmitter mode due to the dmx signal being present.
5. This unit is for Indoor use only.
Write Reviews
SUBMIT